Metal roofs
Address fasteners, seams, penetrations, rust and transitions before applying the protective system.
Fluid-applied commercial roof systems
Commercial Roof Coatings in Overland Park, KS
A properly specified coating system creates a seamless protective surface over a qualifying commercial roof. The roof must first be inspected, repaired, cleaned and prepared for the selected system.
Protection without unnecessary tear-off
A roof coating is a system—not a coat of paint
Dependable performance comes from condition assessment, compatible materials, detailed repairs, reinforced seams and penetrations, correct coverage rates and proper application conditions.
- Fluid-applied waterproofing membrane
- Reinforced seams, fasteners and penetrations as specified
- Reflective finish that helps reduce rooftop heat absorption
- Minimal disruption compared with many tear-off projects
- Service-life extension for qualifying roof systems
Important
Not every roof should be coated
Wet insulation, widespread adhesion failure, structural problems or an incompatible surface can change the recommendation. We evaluate the roof before proposing a system.
How it works
A straightforward process
01
Evaluate
Confirm roof type, condition, moisture concerns and compatibility.
02
Repair
Correct defects and detail seams, penetrations and transitions.
03
Prepare
Clean and prime the surface when the selected system requires it.
04
Apply
Install the specified base and finish coats at required coverage rates.
Potential candidates
Commercial roofs that may qualify
Coating systems may be considered for metal, modified bitumen and certain single-ply or previously coated roofs when inspection and compatibility requirements are satisfied.
Low-slope membranes
Evaluate adhesion, moisture, repairs and manufacturer-specific preparation before coating.
Aging but serviceable roofs
Restore weathering surfaces when the assembly remains a sound candidate for continued service.
Common questions
Commercial roofing questions
How long can a commercial roof coating system last?+
Service life depends on the specified system, roof condition, preparation, application, maintenance and exposure. The proposed scope should identify the applicable system and warranty terms.
Will a reflective coating make the building cooler?+
A reflective finish can reduce solar heat absorbed by the roof surface. Actual building energy performance varies with insulation, rooftop equipment, building use and other conditions.
Can roof coatings stop existing leaks?+
Existing defects should be located and repaired as part of preparation. A coating should not be used to hide wet insulation, failed details or unresolved water entry.
Is coating cheaper than full roof replacement?+
Restoration can cost less than replacement on a qualifying roof because it may reduce tear-off and material needs. The roof must be evaluated before comparing options.
Commercial roof help starts here
Know what your roof needs next.
Schedule a free commercial roof assessment in Overland Park or the Kansas City metro.